Examples of ASTM Test Methods Performed
A262 Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
C138 Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete – requires verification that we can perform, ordered from library
C295 Petrographic Examination of Aggregates for Concrete
C373 Water Absorption, bulk density, apparent porosity and apparent specific gravity of fired white ware products
C457 Microscopical Determination of Parameters of the Air-Void System in…
C642 Density, Absorption and Voids in Hardened Concrete
C657 D-C Volume Resistivity of Glass
C856 Petrographic Examination of Hardened Concrete
C876 Corrosion Potentials of Uncoated Reinforcing Steel Concrete
C1218 Water-Soluble Chloride in Mortar and Concrete
C1341 Flexural Properties of Advanced Ceramic Composites
D56 Flash Point by Tag Closed Cup Tester
D86 Distillation of Petroleum Products at Atmospheric Pressure
D92 Flash Point - Cleveland Open Cup
D95 Water in Petroleum Products and Bituminous Materials by Distillation
D97 Pour Point of Petroleum Products
D127 Drop Melting Point of Petroleum Wax
D129 Sulfur in Petroleum Products
D149 Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D150 AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
D217 Cone Penetration of Lubricating Grease (1/2 scale)
D229 Rigid Sheet and Plate Materials Used for Electrical Insulation
D257 DC Resistance or Conductance of Insulating Materials
D287 API Gravity of Crude Petroleum and Petroleum Products
D412 Tension Testing of Rubber & Thermoplastic Elastomers
D445 Kinematic Viscosity of Transparent and Opaque Liquids
D471 Rubber Property - Effect of Liquids
D482 Ash from Petroleum Products
D495 High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
D573 Rubber Deterioration in Air Oven
D624 Tear Strength - Rubber and Thermoplastic Elastomers
D638 Tensile Properties of Plastics
D648 Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
D664 Acid Number of Petroleum Products by Potentiometric Titration
D695 Compressive Properties of Rigid Plastics (compressive strength, yield strength and modulus)
D751 Standard Test Method for Coated Fabrics
D785 Rockwell Hardness of Plastics and Electrical Insulating Materials
D790 Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D792 Density and Specific Gravity (Relative Density) of Plastics by Displacement
D808 Chloride in Petroleum Products (Bomb)
D974 Acid and Base Number by Color-Indicator Titration
D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
D1002 Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) (Lap-shear test)
D1298 Density, Relative Density (Specific Gravity), or API Gravity fo Crude Petroleum and Liquid Petroleum Products by Hudrometer Method
D1401 Water Separability of Petroleum Oils and Synthetic Fluids
D1403 Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
D1796 Water and Sediment in Fuel Oils by the Centrifuge Method
D1824 Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
D2240 Rubber Property - Durometer Hardness
D2265 Dropping Point of Lubricating Grease Over Wide Temperature Range
D2500 Cloud Point of Petroleum Products
D2344 Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
D3039 Tensile Properties of Polymer Matrix Composite Materials
D3163 Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
D3171 Constituent Content of Composite Materials
D3223 Total Mercury in Water
D3386 Coefficient of Linear Thermal Expansion of Electrical Insulating Materials
D3410 Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
D3417 Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC)
D3418 Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC)
D3518 In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a +/- 45° Laminate
D3529 Matrix Solids Content and Matrix Content of Composite Prepreg
D3530 Volatiles Content of Composite Material Prepreg
D3677 Rubber Identification by Infrared Spectrophotometry
D3850 Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
D4325 Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
D4327 Anions in Water by Chemically Suppressed Ion Chromatography
D5028 Curing Properties of Pultrusion Resins by Thermal Analysis
D5379 Shear Properties of Composite Materials by the V-Notched Beam Method
D5766 Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
D6272 Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
D6304 Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
D6641 Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
E8 Tension Testing of Metallic Materials
E10 Brinell hardness of Metallic Materials
E18 Rockwell Hardness of Metallic Materials
E21 Elevated Temperature Tension Tests of Metallic Materials
E23 Notched Bar Impact Testing of Metallic Materials
E45 Determining the Inclusion Content of Steel
E110 Indentation Hardness of Metallic Materials by Portable Hardness Testers
E112 Determining Average Grain Size
E132 Poisson's Ratio at Room Temperature
E139 Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
E190 Guided Bend Test for Ductility of Welds
E292 Conducting Time-for-Rupture Notch Tension Tests of Materials
E384 Microindentation Hardness of Materials
E466 Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
E562 Determining Volume Fraction by Systematic Manual Point Count
E794 Melt & Crystallization Temperatures by Thermal Analysis
E831 Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
E930 Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
E1019 Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
E1181 Characterizing Duplex Grain Sizes
E1131 Compositional Analysis by Thermogravimetry
E1245 Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
E1356 Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (DSC)
E1382 Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
E1828 Assignment of the Glass Transition Temperature by Thermomechanical Analysis
E1858 Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry (DSC)
E1868 Loss-on-Drying by Thermogravimetry
E1877 Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
E2070 Kinetic Parameters by Differential Scanning Calorimetry (DSC) Using Isothermal Methods
F606 Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets.
Partial List of MIL-SPEC Standards We Meet
MIL-DTL-83420M Wire Rope, Flexible, for Aircraft Control, General Specification for
MIL-I-24768/4 Insulation, Plastic, Laminated, Thermosetting, Glass-mat, Polyester-Resin (GPO N-1)
MIL-M-24041C Molding and Potting Compound, Chemically Cured, Polyurethane
MIL-S-46047E(MR) Steel, Bars and Blanks (1-3/4" and over in diameter) for Barrels of Small Arms Weapons
MIL-STD-2041D Control of Detrimental Materials.
|
